TEMPERATURE / EN 1.4713 / SICROMAL 8
Descripción
El EN 1.4713 es un acero ferrítico resistente al calor aleado con cromo, aluminio y silicio. A diferencia de los aceros austeníticos, no contiene níquel, lo que lo convierte en una solución rentable para entornos de alta temperatura. Está diseñado específicamente para resistir la formación de cascarilla en atmósferas sulfurosas hasta aproximadamente los 800°C. Debido a su estructura ferrítica, ofrece una menor expansión térmica que los aceros de la serie 300 (austeníticos), pero es más susceptible a la fragilidad si se manipula incorrectamente a temperatura ambiente.
Uso en el Mundo Real
- Centrales Eléctricas: Se utiliza ampliamente en la fabricación de barras de parrilla y estructuras de soporte para calderas de carbón.
- Industria Automotriz: Empleado en la producción de componentes de sistemas de escape y piezas de silenciadores que requieren una resistencia al calor moderada.
- Equipos de Tratamiento Térmico: Se encuentra en cajas de recocido, bastidores de carga y componentes de hornos que no enfrentan cargas mecánicas extremas.
- Procesamiento Químico: Utilizado en entornos con gases ricos en azufre y bajos en oxígeno, donde los aceros que contienen níquel podrían sufrir de “peste verde” o sulfatación.
Description
EN 1.4713 is a ferritic heat-resistant steel alloyed with chromium, aluminum, and silicon. Unlike austenitic steels, it is nickel-free, making it a cost-effective solution for high-temperature environments. It is specifically designed to resist scaling in sulfur-bearing atmospheres up to approximately 800°C. Because of its ferritic structure, it offers lower thermal expansion than the 300-series (austenitic) steels but is more susceptible to brittleness if handled improperly at room temperature.
Real-World Usage
- Power Plants: Used extensively in the manufacturing of grate bars and support structures for coal-fired boilers.
- Automotive Industry: Employed in the production of exhaust system components and silencer parts where moderate heat resistance is required.
- Heat Treatment Equipment: Found in annealing boxes, charging racks, and furnace components that do not face extreme mechanical loads.
- Chemical Processing: Used in environments with low-oxygen, sulfur-rich gases where nickel-bearing steels might suffer from “green rot” or sulfidation.